Beyond the Basics
bank are unlocked. Press SRCH to resume the search.
using trunk scanning Scan Delay
Sometimes a user might pause before replying to a transmission. You can set the scanner to hold on an ID for 2 seconds to wait for a reply. That way, the scanner continues to monitor the ID for 2 seconds after the transmission stops before resuming scanning.
Press •/CLR /DELAY to turn trunk scanning scan delay on or off. DLY appears when the scan delay is set to on.
Note: If you consistently miss responses even with scan delay
Notes turned on, change the default system type or the fleet map being
used. See “scanning type I and hybrid trunked systems”.
monitoring talk group IDs
You can use your scanner’s display to monitor the frequencies/talk group IDs of a trunked system for activity, to determine which talk group IDs are the most active. To set the scanner to monitor IDs, hold down SRCH until you hear two short beeps, and SRCH flashes. All active group
63
