Beyond the Basics
5.To release the hold and continue searching, press HOLD/RESUME.
Note: To step through the
Notes frequencies while HOLD appears, press T or S.
storing found frequencies during chain search
You can store frequencies you find in chain search mode or chain search hold mode.
1.Press E/PGM when you find a frequency. The bank numbers flash.
2.Press the bank number you want to store the frequency. The smallest empty channel number and “000.0000” flashes on and off over the frequency you want to store.
3.Press S or T to move to the channel where you wish to store the frequency.
4.Press E/PGM to enter the frequency.
programming search ranges
You can define the search range during a chain search in each search bank.
1.Press and hold E/PGM in chain search or chain search hold mode. The lowest and the highest frequencies of Bank 1 appear alternately.
26
