Beyond the Basics
or if the transmitter is a broadcast television station.
setting the Signal Stalker I options
1.Press MENU.
2.Repeatedly press S or T to select SIG-St., then press E/PGM. One of the following Signal Stalker I options appears:
•S-S.bnd: Lets you select the Signal Stalker I band.
•S-S.ALt: Lets you select the Signal Stalker I alert settings.
•S-S.Lit: Lets you select the Signal Stalker I back light settings.
•S-S.PS: Lets you select the pager screen settings.
•S-S.OnlY: Lets you select the Signal Stalker I mode settings.
•S-S.Int: Lets you select the Signal Stalker I voice interrupt settings.
While the Signal Stalker I is on and the scanner is receiving an audio signal (voice) in normal scanning, the scanner checks the Signal Stalker I every 2 seconds and the audio signal breaks at that moment. If you do not want the
