![](/images/new-backgrounds/1184569/184569149x1.webp)
Beyond the Basics
3.Repeatedly press S or T to select FLEEt, then press E/PGM. A preprogrammed fleet map appears.
4.Repeatedly press S or T until USr appears. Then press E/PGM.
5.Repeatedly press S or T to select the size code for the first block, then press E/PGM. The next available block appears.
6.Repeat Step 5 until you have selected a size code for each desired block.
7.Press SRCH. The scanner exits the trunking programming mode, tunes the data channel, then searches using the map you programmed.
Notes
Note: If you select size code
•
•
0 and 4
•
0
Since these size codes require multiple blocks, you will be prompted for the next available block when you program a fleet map. For example, if you assign Block 0 as
75