Radio Shack PRO-528 manual Using Signal Stalker, Trunking operation

Beyond the Basics

5.When you select the option, press •/ CLR /DELAY to exit the option mode.

6.Press MENU to exit the menu mode.

using Signal Stalker I

Notes Note: Turn off the data skip feature if it is on.

To turn on Signal Stalker I, turn SQUELCH

fully clockwise, then press except in WX search, program search range,

or program mode. appears. Every 2 seconds, the scanner searches for frequencies in the range you specified in “Setting the Signal Stalker I Options.”

When the scanner finds a frequency, it sounds the alert you specified in “Setting the Signal Stalker I Options”, and Found flashes. Press any key to confirm the displayed frequency. Press HOLD/RESUME to resume scanning.

To turn on Signal Stalker I and turn off normal scanning, turn S-S.OnlY of Signal Stalker I options to on. flashes. See “setting the Signal Stalker I options.”

To turn off Signal Stalker I and turn on

normal scanning, press and disappears.

trunking operation

The scanner tracks transmissions that use the Motorola Type I, Type II, hybrid, and EDACS and LTR analog trunking systems.

51