Reset (Settings Initialization)

The Easy Menu shown to the right will be displayed when the

 

SELECT button is used to select DISPLAY and moreover

INITIALIZE?

DISPLAY INT is selected from the On-screen Display

YES NO

System Easy Menu 16 during RGB1/RGB2 input. If the

 

key (select Yes) of the SELECT button is pressed at this time, the user adjustment values in the table below for the signal currently being received will be deleted and the factory settings will be restored.

Pressing the key (select No) cancels deletion and returns the DISPLAY menu.

DISPLAY menu item

Horizontal position

H.POSITION

 

 

Vertical position

V.POSITION

 

 

Dot clock frequency

CLOCK

 

 

Dot clock phase

PHASE

 

 

ENGLISH

Signal Check

The status of signal reception is checked automatically and the result is displayed on the screen.

 

Status

Display

 

Example

 

 

 

 

 

Signals are received

•The input terminal and the

 

 

 

normally.

 

horizontal and vertical frequencies

 

RGB1 [D-SUB]

 

 

are displayed in a guidance image.

 

 

 

 

 

 

 

 

 

 

H : 46.5kHz, V : 60Hz

 

 

 

Eithe VIDEO1 or VIDEO2 is displayed

 

 

 

on VIDEO input.

 

 

 

 

 

A sync signal could not be

•The guidance message “POWER

 

 

 

detected.

 

SAVE” is displayed for about 5

 

 

 

Also includes the status

seconds.

 

POWER SAVE

•In the event of continued absence of

 

of the VESA-DPMS sync

a sync signal, the power indicating

 

 

 

signal.

 

lamp flickers and the monitor enters

 

 

 

 

 

power save mode.

 

 

 

 

 

 

 

 

The input signal does not

•Displays OUT OF FREQUENCY.

 

 

 

meet display specifications

and the Guide. (After 5 sec. have

 

OUT OF FREQUENCY.

or erratic.

 

elapsed, the display darkens and

 

 

 

 

 

28

30

display continues until the correct

 

 

 

signal is received.)

 

 

 

 

 

 

 

 

 

23

Page 25
Image 25
Hitachi CMP307XU manual Reset Settings Initialization, Signal Check, Display menu item, Status Display Example