Contrast Adjustment
While the
controller SELECT button 
or 
to adjust the contrast.
When you press these buttons, the status of contrast adjustment and the input horizontal (H) and vertical
(V)frequencies of the input signal will be displayed in a guidance image.
While the guidance is on display, press the 
key to narrow the difference between darkness and brightness.
While the guidance is on display, press the 
key to widen the difference between darkness and brightness.
You can also adjust the contrast setting via the on- screen display system, EasyMenu 16 .
The contrast adjustment mode will exit when no keys are entered for 5 seconds. (The adjustment status guidance will disappear automatically.)
| Contrast setting |
Remote |
|
controller | CONTRAST : 100 |
SELECT |
|
| H :* *. * kHz, V :* *. * Hz |
Input horizontal | Input vertical |
frequency | frequency |
Adjustment status guidance
ENGLISH
Sound Mute
Press the remote controller MUTE button to mute the sound temporarily.
When you press the button, [MUTE] (pink) and the status |
|
|
| Sound volume setting | ||||
of volume setting will be displayed in a guidance image. | Remote |
|
|
|
| |||
While the sound is muted, press the | button to turn down the |
|
|
|
| |||
controller | MUTE | : 30 |
| |||||
volume. |
|
| MUTE |
| ||||
|
|
|
|
|
| |||
|
|
|
|
|
|
|
| |
While the sound is muted, press the 
button to cancel the mute.
You can also adjust the sound volume setting of the mute
via the | 16 . | (The display will turn to pink.) |
|
Press the remote controller MUTE button once again and the mute will be canceled and the guidance will change to VOLUME (blue), enabling the volume to be heard.
When MUTE is used, the guide display will continue for 5 sec. and then turn off. 
The set itself does not have a MUTE button.
Input Signal Status Display
Press the remote controller RECALL button to display the status of input signals on the screen. Press the remote controller RECALL button once again to exit the screen display.
| The contrast adjustment mode will exit when | Remote | ||
| ||||
| no keys are entered for 5 seconds. | |||
| The set itself does not have a RECALL button. | controller | ||
|
| RECALL | ||
|
| |||
|
|
|
|
|
Input terminal name
RGB1 |
H : 46.5kHz, V : 60Hz |
Input horizontal | Input vertical |
frequency | frequency |
15
