OPERATING INSTRUCTIONS
Turning Power On and Off
To turn on the set power supply, set the MAIN POWER switch ( 
) of the main unit to ON and then press the SUB POWER button ( 
) or the POWER button of the remote control.
To turn off the set power supply, press the SUB POWER button (
) of the main unit or the POWER button of the remote control, then set the MAIN POWER switch (
) to OFF.
For normal operations, leave the main power switch (
) set to ON and use the sub power button or the Power button of the remote control to turn the power on and off.
The indicating lamp lights when the power is turned on.
ENGLISH
Indicating lamp | Power status |
|
|
Lit in red | OFF |
|
|
Lit or flickering in green | ON |
|
|
Set unit
When the indicating lamp blinks in green or the message “POWER SAVE” or “OUT OF FREQUENCY” appears on the screen, there is something unusual about the status of reception. See “Symptoms That Seemingly Appear to be Failures.” 26
Main power switch
POWER
Remote controller
TIPS
Avoid repeatedly turning the monitor on and off at short time intervals.
Failures might result from such operation.
Turn off the main power switch ( 
) before leaving the monitor out of use for an extended period of time.
If a power failure occurs while the set is running, it would be powered on upon recovery from the failure. Turn off the unit main power switch before leaving the set.
13
