Connecting to Video Equipment

(such as a video disc player, a DVD player, or a video camera)

Read Usage Notes ( 3 to 6 ) carefully to ensure maximum safety before proceeding to these steps:

(1)Choose an appropriate site and install the product on a level table where the stand is secure.

Install the monitor to have ready access to a power socket available.

(2)Make sure that the monitor’s power switch is off.

The monitor is shipped with the power switch off.

(3)Make sure that the video equipment’s power switch is off.

(4)Interconnect the signal input terminal on the monitor rear panel and the video equipment’s signal output terminal to each other using an optional cable.

(5)Insert one end of the power cable included into the rear-panel power cable connector and the other end into a power socket.

If a power adapter is used, ground the grounding wire to avoid electrical shocks and radio interference. (Complete grounding before connecting the power plug to a power supply. Before disconnecting the grounding wire, be sure to disconnect the power plug from the power supply first.)

(6)Turn on the monitor, then the video equipment’s to make sure that a display image appears on the monitor screen.

For instructions on turning on the monitor and adjusting its display images, see “Operating

ENGLISH

Instructions” ( 13 to 21 ).

Monitor rear panel

Power cable

 

 

 

 

 

Power cable

 

 

 

 

 

 

ToSvideo output terminals

 

 

 

 

 

connector

 

 

 

 

 

 

 

 

 

 

VIDEO2 INPUT [COMPONENT]

 

 

 

 

VIDEO1 INPUT

 

 

 

 

 

AUDIO

 

 

 

AUDIO

 

 

 

 

 

 

(MONO)

 

 

 

 

(MONO)

 

 

R

 

 

L

PR/CR PB/CB Y

R

 

 

L VIDEO S-VIDEO

 

Video equipment

(such as a video disc player,

a DVD player, and a video camer)

Red(R)

White(W)

Yellow(V)

output terminals

To audio/video

output terminals

To component

Red(R)

White(W)

terminals

To audio output

Red(R)

White(W)

terminals

To audio input

Red(R)

White(W)

input terminals

To component

Yellow(V)

intput terminals

To audio/video

To S video input terminals

Use if the video equipment has an

S video input terminal

If video equipment with an S video input terminal is used, cabling by the S video cable is

 

recommended to provide finer video quality. (If an S video input terminal and a video

 

input terminal connect to the monitor at the same time, S video input would govern.)

11

Page 13
Image 13
Hitachi CMP307XU manual Connecting to Video Equipment, Video equipment