Beyond the Basics
Note: You cannot skip frequencies during WX service search.
To skip a frequency, press L/O when the scanner stops on the frequency during a chain, direct and service search and Signal Stalker I. The scanner stores the frequency in memory and automatically resumes the search.
To clear a single frequency from skip memory so the scanner stops on it during a chain, direct and service search and Signal Stalker I:
1.Press HOLD/RESUME to stop the search.
2.Press S or T to select the frequency. L/O appears.
3.Press L/O. L/O disappears.
To clear all the skip frequencies at once while searching, press HOLD/RESUME, then hold down L/O until the scanner beeps twice.
Notes:
•If you selected all frequencies to be skipped within the search range,
| the scanner beeps 3 times and |
Notes | does not search. |
•If you select more than 200 frequencies to skip, each new frequency replaces a frequency
29
