Beyond the Basics

If you entered a frequency in Step 4, which already exists on another channel, the scanner beeps an error tone and displays that channel. Press •/CLR /DELAY to clear the display, or press E/PGM to store the frequency in both channels.

The scanner automatically rounds the entered number to the nearest valid frequency. For example, if you enter 151.473 (MHz), your scanner accepts it as 151.475.

After a transmission, the scanner automatically pauses for 2 seconds on this channel before proceeding to the next active transmission. Press •/CLR /DELAY to turn the delay function off or on. See “delay”). The scanner stores this setting in the channel.

6.To program the next channel in sequence, press S or T and repeat Steps 4 and 5.

copying/moving a frequency

If you want to copy/move a frequency to a channel, follow the steps below:

1.Manually select the channel which contains the frequency you want to copy or move.

22

Page 22
Image 22
Radio Shack PRO-528 manual Beyond the Basics, Copying/moving a frequency