Beyond the Basics
depending upon the trunk system selected.
Notes:
•If you enter an invalid frequency (outside the selected range), the scanner beeps, the channel number flashes and Error appears. If this happens, press •/CLR / DELAY to clear the frequency, then repeat the entry.
Notes • For EDACS (Ed) and LTR systems, you must enter the frequencies in logical channel number (LCN) order.
•If you try to enter a duplicate frequency in a bank, the scanner beeps and the channel which was previously stored appears
5.Press S or T to select the next channel in the bank and repeat Step 4 to enter frequencies in that bank.
6.Repeatedly press •/CLR /DELAY to return back to Step 2. Repeat Steps 2 and 5 until all frequencies have been entered.
7.Press SRCH to begin searching for the trunk’s data channel and scan conventional frequencies at the same
55
