Beyond the Basics
2.Press the bank number you want to change the range. The lower frequency range appears.
3.Using the number keys, enter the lower limit frequency, and then press E/PGM.
4.Press S or T to change the frequency to an upper limit frequency.
5.Using the number keys, enter the upper limit frequency, and then press E/PGM.
6.When you finish programming frequency ranges, press SRCH.
direct search
You can search up or down from the currently displayed frequency using direct search. SRCH appears during searching.
Press and hold SRCH when the frequency you want to start from appears. Or, enter the frequency you want to start from using the number keys in search hold mode, then press S or T.
Note: If you enter an invalid
Notes frequency, the scanner displays Error. Press •/CLR /DELAY.
service bank search
You can search for ham, marine, aircraft, or police (fire/emergency) transmissions without knowing the specific frequencies used in your area. The scanner is
27
