Beyond the Basics
you assign Block 0 as
programming a hybrid system
A hybrid system is simply a Type I system with some of its blocks designated as Type II blocks.
To program a hybrid system, follow the steps listed in “Programming a Fleet Map.” However, if you want a block to be Type II, instead of pressing S or T to select the size block (Step 5), enter size code
programming the Base and Offset frequencies
To properly track Motorola VHF and UHF trunked systems, you must program the applicable base and offset frequencies for each system. For a list of these frequencies and other scanner information, go to www.trunkscanner.com and other similar frequency resources.
1.Select the trunking programming mode.
2.Press the number key of the bank where you want to store the base frequency.
76
