Motorola V.3600 Set H command to V.32 †, Speaker off when carrier is present, Response messages

Command Index and Defaults

Table E-1. Synchronous Command Reference (Continued)

Command	Page	S-Reg	Description
H	5-23	--	Hang up †
H1		--	Forces modem off hook †
H2		S14	Set H command to V.32 †
H3		S14	Set H command to fast †
I	5-24	--	Request product code
I1		--	Request EPROM CRC value
I3		--	Request product version
I4		--	Returns Motorola V.3600
I5		--	Disconnect reason
L, L1, L2	5-24	S22	Speaker volume low
L3		S22	Speaker volume high
M	5-24	S22	Speaker off
M1		S22	Speaker off when carrier is present
M2		S22	Speaker always on
M3		S22	Speaker off when dialing and carrier is
			present
O	5-25	--	Restore data mode (after escape) †
O1		--	Retrain and restores data mode (after escape)
			†
Q	5-6	S14	Response displays on
Q1		S14	Response displays off
Q2		S14	Response displays on in originate mode only
Sn?	10-3	--	Read value in register n (decimal)
Sn?^		--	Read value in register n
			(hexadecimal)
Sn=v		--	Set v (value) in register n (decimal)
Sn=v^	10-3	--	Set v (value) in register n
			(hexadecimal)
Sn.#=v	10-4	--	Set single bit value in register n,#= bit
			position 0-7, v = bit value 1 or 0
V	5-6	S14	Response codes
V1		S14	Response messages

† cannot be executed from remote configuration mode

E-2 V.3600