Motorola V.3600 Command Reg Description Automode modulation, AT command set enabled, Originate

Command Index and Defaults

Table E-1. Synchronous Command Reference (Continued)

Command	Page	S-Reg	Description
*MM	5-27	--	Automode (modulation)
*MM1		--	V.21
*MM2		--	Bell 103J
*MM3		--	Reserved
*MM4		--	Bell 212A
*MM5		--	V.22 bis
*MM6		--	V.27 bis 4-wire leased only
*MM7	5-27	--	Reserved
*MM8		--	V.29 4-wire leased only
*MM9		--	Reserved
*MM10		--	V.33 4-wire leased only
*MM11		--	V.32 bis
*MM12		--	V.34
*ND	5-40	--	Displays the nine stored numbers
*NT	5-33	S29	AT command set disabled
*NT1		S29	AT command set enabled
*OR	5-36	S14	Originate
*OR1		S14	Forced answer
*RC	5-8	S57	15 - 4800 bps, 18 - 9600 bps
*RC1		S57	11 - 4800 bps, 12 - 9600 bps
*RD	7-8	S34	Ignore pin 21
*RD1		S34	DTE commanded RDL enabled
*RO	5-41	S29	Retain options at disconnect
*RO1		S29	Restore options at disconnect
*RR	5-31	--	Rate negotiate to 2400 †
*RR1		--	Rate negotiate to 4800 †
*RR2		--	Rate negotiate to 7200 †
*RR3		--	Rate negotiate to 9600 †
*RR4		--	Rate negotiate to 12000 †
*RR5		--	Rate negotiate to 14400 †
*RR6		--	Rate negotiate to 16800 †
*RR7		--	Rate negotiate to 19200 †
*RR8		--	Rate negotiate to 21600 †
*RR9		--	Rate negotiate to 24000 †
*RR10		--	Rate negotiate to 26400 †
*RR11		--	Rate negotiate to 28800 †
*RR12		--	Rate negotiate to 31200 †
*RR13	5-31	--	Rate negotiate to 33600 †

† cannot be executed from remote configuration mode

E-10 V.3600