Motorola V.3600 manual Tone Dialing T, Pulse Dialing P, Insert Long Pause

AT Commands

Use spaces, hyphens, parentheses, or other punctuation, except dial modifiers, to make the command line easier to read and enter. For example, these are all treated the same:

AT D 1-800-555-1212

AT D 1 (800) 555-1212

ATD18005551212

The dial modifiers are as follows.

Command	Operation
T	Tone dialing
P	Pulse dialing
,	Insert a long pause (2 sec or value in S8)
W	Wait for 2nd dial tone
!	Flash (1/2 sec)
R	Switch to answer mode after dialing
;	Return to command mode after dialing
@	Wait for silence
S	Dial stored command line or number

Tone Dialing — T

To tone dial a number sequence, insert a T in the dial sequence.

AT D T 323-1111

In this example, the modem tone dials the telephone number. The dialing method selected remains in effect until changed.

Pulse Dialing — P

To pulse dial a number sequence, insert a P in the dial sequence.

AT D P 554-9902

Insert Long Pause — ,

To insert a long pause in the dialing sequence, use a comma. This inserts a 2 second delay (or the value in register S8).

AT D P 9, 1-800-554-1000

Here the modem pulse dials a 9, pauses for the telephone system to switch to an outside line, then dials the phone number. Comma pauses may be inserted consecutively if desired.

5-14 V.3600