Motorola V.3600 manual Auto-Reliable Fallback Character %An, Command Operation

Protocols

Command	Operation
\N	Normal mode — no error control; data buffered
\N1	Direct mode — no error control; data not buffered
\N2	MNP only — try MNP; disconnect if not successful
\N3	MNP or normal — try MNP; fallback to normal async
\N4	LAPM only — try LAPM; disconnect if not successful
\N5	LAPM or normal — try LAPM; fallback to normal
\N6	LAPM or MNP — try both protocols; disconnect if not
	successful
\N7	LAPM, MNP, or normal — try both protocols;
	fallback to normal if not successful

Auto-Reliable Fallback Character — %An

Select the ASCII character to be recognized as the auto-reliable fallback character by the answering modem. During negotiation of protocol in auto-reliable mode, the answering modem switches from reliable to normal mode when receiving the auto-reliable fallback character from the calling modem and passes the character to the serial port.

Enter the %An command to set the auto-reliable fallback character (n=1-27 decimal representing an ASCII character).

Command	Operation
%A0	Disable auto-reliable fallback character
%An	Sets ASCII character to be recognized as the auto-reliable
	fallback character

Note

The modem must be set for auto-reliable mode

(AT\N3, \N5, \N6, \N7).

6-6 V.3600