V.25 bis Autodialer

If circular linking (1 to 8 to 7 to 1) is used, dialing is discontinued after the addressed number in the dial command has been dialed twice. If only one parameter follows the PRL command, the number at address a is unlinked from its forward link.

For example, if the link list 4 to 8 to 3 to 7 to 9 to 1 exists and PRL 7 is received, 7 would be unlinked from 9, but not from 3. This would result in two link lists: 4 to 8 to 3 to 7 and 9 to 1.

Responses:

VAL Valid command received. Transmitted on receiving an error- free command with no transmission error such as a parity error. This confirmation is sent before the command is executed.

INVCU Invalid command - command unknown.

Example: TRL 1;5

INVMS Invalid command - message syntax error.

Examples: PRL;1;5

PRL;

INVPS Invalid command - parameter syntax error.

Examples: PRL 1;5;

PRL 1;0;0

PRL 1;

PRL

PRL 001;5

INVPV Invalid command - parameter value error.

Examples: PRL 1;Q

PRL Q;1

PRL 1;45 where addresses 01-09 are defined

CFILD Call failure - no connection from link list.

Request List of Delayed Numbers — RLD

This command instructs the modem to send a list of delayed numbers to the DTE.

V.3600

11-9

Page 177
Image 177
Motorola V.3600 manual Request List of Delayed Numbers RLD