Motorola V.3600 Pause Interval for Comma S8, Carrier Detect Time S9, Lost Carrier Detect Time S10

Status Registers

Pause for Ringback and Carrier Detection / Wait for 2nd Dial Tone — S7

If ringback is not detected in the number of seconds in S7 (1-255), the modem disconnects and sends the NO CARRIER message or code. If ringback is detected, the modem begins to look for a carrier.

If carrier is not detected within the number of seconds in S7, the modem hangs up and sends the NO CARRIER message or code.

Values between 1 and 255 may be used. The default value is 30 (seconds).

Pause Interval for Comma — S8

When a dial command contains a comma, the modem pauses the number of seconds in S8. Change S8 to change the basic pause interval (0-255), or use several commas in a row for greater delay during dialing. The default value is 2 (seconds).

Carrier Detect Time — S9

S9 contains the amount of time (0-255) in 0.1 second increments that the carrier must be present to be recognized. The default value is 6

(0.6 second). This timer can be extended to lessen the likelihood of false detection of carrier.

Lost Carrier Detect Time — S10

S10 contains the amount of time (0-255) in 0.1 second increments that the carrier must be absent to be recognized as a loss of carrier. The default value is 14 (1.4 seconds).

DTMF Tone Duration — S11

S11 determines the length of DTMF tones. The period of silence is equal to the duration of the tone. The value of this register must be entered in multiples of 10. Default value is 80 (80 ms).

10-6 V.3600