Motorola V.3600 manual Protocols, Test Mode Operation

Contents (continued)

Chapter 5. AT Commands (Continued)

Retaining / Restoring Options — *RO	5-41
Soft Download Password — %P1, $Y	5-41
Remote Configuration	5-41
Remote Configuration Security	5-42
Remote Security Code — %P=	5-42
Entering Remote Configuration — %T=, &T	5-43
Enabling/Disabling Remote Configuration — *RA	5-43
Remote Configuration DTE Speed — *RB	5-44
Remote Configuration Format — *RF	5-44
Remote Configuration Saving or Discarding Options — *RQ	5-45

Chapter 6. Protocols

CCITT V.42 bis Error Control Protocol	6-1
Reliable Mode	6-1
Auto-Reliable Mode	6-2
Constant Speed Interface	6-2
Data Compression	6-2
Normal Mode	6-2
Direct Mode	6-3
Flow Control	6-3
Protocol Commands	6-3
Disconnect Buffer Delay — Q%D	6-4
Serial Port (DTE) Constant Speed — \J	6-4
V.42 Optional Detection Phase — \M	6-5
Operating Mode — \N	6-5
Auto-Reliable Fallback Character — %An	6-6
Serial Port Flow Control — \Q	6-7
XON/XOFF Pass Through — \X	6-8
Data Link Flow Control — \G	6-8
Break Control — \Kn	6-9
Inactivity Timer — \T	6-10
Maximum Reliable Block Size — \A	6-10
Transmit Break / Set Break Length — \B	6-11
Set Auto-Reliable Buffer — \C	6-11
V.42bis Data Compression — %C	6-11

Chapter 7. Test Mode Operation

Test Categories	7-1
Terminating a Test in Progress — Q&T	7-2
Testing the Local Modem	7-3
Local Analog Loopback — &T1	7-3
Local Analog Loopback with Self Test — &T8	7-4
Testing the Remote Modem	7-4
Local Digital Loopback — &T3	7-5
Grant/Deny RDL Request — &T4, &T5	7-5
Remote Digital Loopback — &T6	7-6
Remote Digital Loopback with Self Test — &T7	7-6
Test Pattern — %T	7-7
Bilateral Digital Test Enable / Disable — *DG	7-7
DTE Controlled Remote Digital Loopback (Pin 21) — *RD	7-8
DTE Controlled Local Analog Loopback (Pin 18) *LA	7-8

xii V.3600