Motorola V.3600 manual Remote Configuration, Retaining / Restoring Options *RO

AT Commands

Retaining / Restoring Options — *RO

This option is used when the modem is shared by two or more DTEs.

When options are retained, the current configuration is not altered at disconnect. With options restored, the modem returns to the previously stored configuration on disconnect.

When options are restored at disconnect, the following commands return OK but are not executed:

•*CNStore telephone number

•&ZStore telephone number

•&FRecall factory configuration

•&WStore current configuration

Command	Operation
*RO	Retain options at disconnect
*RO1	Restore options at disconnect

Soft Download Password — %P1, $Y

Select a numeric password to permit/inhibit software downloading via flash memory if desired. The process is detailed in Appendix H.

Command	Operation
%P1=pw	Set software download password to 0-99999999
%P1=D	Disable software download
%P1?	Display software download password
$Y	Enable soft download flash

Remote Configuration

This mode of operation allows viewing or modifying the options of a remote modem that supports Motorola or Motorola UDS remote configuration. Remote configuration is performed using the front panel LCD or, more commonly, AT commands from the local terminal. Remote configuration is initiated by the local (master) modem through a proprietary protocol, a security code, and an acknowledgment from the remote (slave) unit to be modified. The security code is inserted and provides protection from unauthorized entry. The modems are shipped from the factory without a security code.

V.3600 5-41