Motorola V.3600 manual Chapter Bis Autodialer, Select Sync Data

Chapter 11

V.25 bis Autodialer

V.25 bis is an option that allows dialing functions to be controlled using synchronous data.

Select V.25 bis through the appropriate &M command in the AT command set (refer to the “Asynchronous / Synchronous Mode Selection — &M” section on page 5-25).

If using the LCD,

1)Scroll through the menu to Main Menu 5, MODIFY CONFIGURATION.

2)Advance to and enter the DTE PARAMETERS submenu.

3)Select SYNC DATA.

4)Advance to DIAL METHOD.

5)Select one of V.25 BISYNC DIALER, V.25 SDLC DIALER, or V.25 ASYNC DIALER, and then select either ASCII or EBCDIC character format.

Note

The modem must be configured as V.25 SDLC ASCII NRZ for use with an AS400 IBM computer.

V.3600 11-1