Motorola V.3600 manual Factory Reset $F=pw$pw, Removing a User $Rn, Security Status $E?

Security

When the superuser logs on, the secure V.3600 automatically displays any illegal attempts since the last superuser logon. If it is not reset, the illegal attempt count will remain and the superuser will not be reminded unless more illegal attempts occur. To manually request this same information enter

AT$M

The V.3600 responds by scrolling any illegal attempt information onto the screen as in the following example:

USER NUMBER: 01, ILLEGAL ATTEMPTS: 1,

STATUS: NORMAL

USER NUMBER: 14, ILLEGAL ATTEMPTS: 7,

STATUS: SUSPENDED

OK

Enter the $Mn command (where n equals user number) to reset a specific user’s illegal attempt count.

Enter the $M* command to reset all of the user’s illegal attempt counts.

Factory Reset — $F=pw$pw

To reinitialize the security feature enter the $F=pw$pw command (where pw is the "current" superuser password). This command deletes all user information and reinstates factory default passwords. User information cannot be recalled.

Removing a User — $Rn

This superuser command removes a user from active status without deleting all of the user’s information. The user can be restored to active status by setting the password with the corresponding user number as previously mentioned. To remove a user, enter

AT$Rn

where n is the user numbers 2-50.

The superuser or user with ID #1 cannot be deleted from the user list.

Security Status — $E?

System security status can be verified using the $E? command.

8-10 V.3600