Motorola V.3600 manual Default, Reg Function Factory Set

Command Index and Defaults

	RO/			Default
S-Reg		Page	Function	Factory Set
	RW
				#1
S41	RW	10-14	Remote configuration escape	3d hex
			character
S42	RW		Remote configuration guard time	32 hex
S44	RW		DTE XON character	11 hex
S45	RW		DTE XOFF character	13 hex
S49	RW		DCE XON character	11 hex
S50	RW		DCE XOFF character	13 hex
S51	RW		Dial transmit level	10
S52	RW	10-16	Lease transmit level	0
S53	RW		Bit mapped	0
S54	RW	10-16	Bit mapped	63 hex
S56	RW	10-17	V.42 compression	03 hex
S57	RW		Bit mapped	0
S58	RW		Inactivity timer	0
S59	RW	10-18	MNP break control	5
S60	RW		Bit mapped	5b hex
S61	RO	10-19	DTE word length, parity	18 hex
S62	RW		Disconnect buffer delay	0
S63	RW		Maximum protocol block size	255
S64	RW	10-20	Auto-reliable character	0
S67	RO		Link speed status	0
S69	RW	10-21	Maximum DCE speed	18
S70	RW	10-22	Protocol operating mode	0f hex
S71	RO		Protocol operating mode status	0
S72	RW	10-23	Bit mapped	0
S73	RW		Password timeout security	0
S74	RW		Callback delay	15
S75	RW		Callback retry	0
S76	RW	10-24	Callback retry delay	15
S77	RW		Lockout threshold	0
S78	RW		Autocallback timer	30
S79	RW		Break length	35
S80	RO	10-25	Serial port speed	20
S81	RW	10-26	Minimum DCE rate	1
S82	RW		Bit mapped	0 hex
S84	RO	10-26	Negotiation status	0
S88	RW		Modulation type	0

RO=Read only RW=Read or write

E-18 V.3600