Beyond the Basics
selecting a preset fleet map
1.Set the scanner for conventional scanning and press E/PGM, then press TRUNK to select the trunking programming mode and the bank you want to change.
2.Repeatedly press S or T to select TYPE 1 SYSTEM (E1), then press E/ PGM.
3.Repeatedly press S or T to select FLEEt, then press E/PGM.
4.Repeatedly press S or T to select the name of the desired map (example E1P7). The preprogrammed fleet map appears.
5.Press E/PGM. FLEEt displays.
Note: When the scanner searches
Notes for transmissions, Type I fleet and subfleet IDs such as
If you are still unable to listen to a complete conversation, then try another preset map.
programming a fleet map
1.Select the trunking programming mode and the bank you want to change.
2.Repeatedly press S or T to select Type 1 System (E1), then press E/PGM.
74
