Sanyo DSR - 300 Network Control Function, Click Network Connections, Click Properties, Click OK

1 NETWORK CONTROL FUNCTION

(when optional interface board is installed)

Minimum system requirements

Operating system: Windows 98/98SE/Me/2000/XP

Browser: Internet Explorer Ver. 5.0 or later

Video: 65,000 colors, resolution 800 x 600 dpi or higher

Audio playback requirements

DirectX or compatible sound card

Speaker

For Windows XP

The following example applies to Windows XP. Transmission control protocol/Internet protocol (TCP/IP) is the standard protocol used for Internet and Intranet. If this unit is to be used when connected to a network, specify a TCP/IP to suit each operating system for the computer that is used for the settings.

1 Click the [Network and Internet

Connections] icon in the [Control

Panel].

The [Network and Internet Connections] window is displayed.

2 Click [Network Connections].

The [Network Connections] window is displayed, and the settings for the LAN card (Ethernet adapter) being used will appear in the [LAN or High-Speed Internet] column.

3 Right-click on the LAN card (Ethernet adapter) being used, and then select [Properties] from the pop-up menu.

The [General] tab window in the [Local Area Connection Properties] window is displayed.

4 Check that [Internet Protocol (TCP/IP)] is selected in the list of components used by the Ethernet board that appears in the [This connection uses the following items:] box.

If [Internet Protocol (TCP/IP)] is not selected, select it.

5 Click [Properties].

The [General] tab window in the [Internet Protocol (TCP/ IP) Properties] window is displayed.

6 Select [Use the following IP address:] and then type in the IP address and the subnet mask.

7		Check the settings, and then click [OK].
The display will return to the [Local Area Connection
Properties] window.
8		Click [OK].
This completes the TCP/IP settings.
z Ask the network administrator for details on DNS and
	gateway address settings.
			NETWORK CONTROL

92 English