Sanyo DSR - 300 Commands for setting the recorder, On-screen commands „ Menu 74H, „ /CLEAR 53H

1 INTERFACE SPECIFICATIONS

(when optional interface board is installed)

Commands for setting the recorder

„CLOCK ADJUST (E0H)

z If sent with the recorder stopped, resets the minutes and seconds of the clock display to 00. For example, if sent between 13:30:00 and 14:29:59, sets the clock to 14:00:00.

On-screen commands

„MENU (74H)

z If sent with the recorder stopped, displays the main menu.

z If sent with a sub-menu displayed, toggles the menu screen each time it is sent.

„ /CLEAR (53H)

z If sent while a menu screen is displayed, sets the setting item selection or value.

z If sent while the main menu is displayed, switches to the selected sub-menu.

z If sent while a data display is on screen, moves the display to the left. No operation is performed if sent during recording.

z Starts rewinding.

z If sent during playback, starts rewind playback. z If sent during still mode, rewinds the image by one

frame (field).

„ /ENTER (63H)

z If sent while a menu screen is displayed, sets the setting item selection or value.

z If sent while the main menu is displayed, switches to the selected sub-menu.

z If sent while a data display is on screen, moves the display to the right. No operation is performed if sent during recording.

z Starts fast-forwarding.

z If sent during playback, starts fast-forward playback. z If sent during still mode, advances the image by one

frame (field).

„SHIFT +/ (65H)

z If sent while a menu screen is displayed, selects the setting item, changes the setting, or changes (increases) the set value.

„SHIFT -/ (66H)

z If sent while a menu screen is displayed, selects the setting item, changes the setting, or changes (decreases) the set value.

„OSD/EXIT (8EH)

z If sent while the main menu or a sub-menu is displayed, exits menu settings.

z If sent during recording or playback, changes/hides the operation display position.

„MENU RESET (E1H)

z If a menu screen is displayed, resets (initializes) that menu’s settings.

Commands for acquiring information

When a command for acquiring information is sent, the recorder returns the information (data) for the command.

„STATUS SENSE (D7H)

z Returns the recorder’s operating status in 5 bytes. (JP. 85)

RXD D7

TXD

Return codes

„ACK (0AH)

z Returned when the recorder received a valid command.

RXD

TXD 0A

„NAK (0BH)

z Returned when the recorder received an undefined (or non-functional) command.

RXD

TXD 0B

„T/D SEARCH (B5H) for RS-232C only

z Enter year, month, date, hour, minute, then run T/D SEARCH with (40H).

INTERFACE SPECIFICATIONS

84 English