MENU CONFIGURATION AND OPERATIONS

This section describes the menu configuration, and which menu item to select for each operation.

Displaying menu screens and setting screens

Press the [MENU] button to display the menu screen. This unit uses two different types of menu screen.

<MAIN MENU 1> lets you make settings for recording. <MAIN MENU 2> lets you make settings for useful operating functions and for the system itself.

[MENU] button [ ] button [ ] button [ ] button

[ ] button [EXIT/OSD] button

1 Press the [MENU] button.

The <MAIN MENU 1> screen appears. Press this [MENU] button once again to call up the <MAIN MENU 2> screen.

Press the [ ] or [ ] button to switch between the main menus.

“TO MAIN MENU 2” or “TO MAIN MENU 1” can be selected from the bottom of each main menu screen, and the display will switch to the corresponding screen when the [ ] button is then pressed.

Moving to a sub-menu from MAIN MENU 1 or

MAIN MENU 2

2 Press the [ ] or [ ] button to select a menu.

(Example: “3. RECORDING AREA SET”)

When you move the cursor, the selected item is displayed in reverse.

Cursor position

3 Press the [ ] button.

The selected sub-menu appears.

The cursor is positioned on the first setting item.

Returning to the normal screen.

4 Press the [EXIT/OSD] button.

The display returns to the normal screen.

zYou can display a menu screen during recording, but not during playback.

zPress the [ ] button to return to the main menu screen from a sub-menu screen.

zYou cannot change menu settings while recording.

42

English

SETTINGS

Page 43
Image 43
Sanyo DSR - 300 manual Menu Configuration and Operations, Displaying menu screens and setting screens