Sanyo DSR - 300 manual Language/Clock Set, EXT. Clock SET settings

1LANGUAGE/CLOCK SET

When “USE” is selected for <DAYLIGHT SAVING>

You can set the date/time at which the time is switched from standard time to daylight savings time, and the date/ time at which the time is switched back again.

The example below is the default value.

Example:

After the clock display reaches April 4, 2004, 01:59, the next clock display is 03:00, putting the clock an hour ahead (summer time).

After the clock display reaches October 31, 2004, 01:59, the next clock display is 01:00, putting the clock an hour behind (back to standard time).

(1) (2) (3) (4)

(5) (6) (7) (8)

(1)Sets the week for switching to daylight savings time.

(2)Sets the day of the week.

(3)Sets the month.

(4)Sets the time.

(5)Sets the week for ending daylight savings time.

(6)Sets the day of the week.

(7)Sets the month.

(8)Sets the time.

7 Press the [ ] button.

“1ST” flashes.

8 Press the [ ] or [ ] button to select the desired week, then press the [ ] button.

The cursor moves to the day of the week.

9 Press the [ ] or [ ] button to select the desired day of the week, then press the [ ] button.

The cursor moves to the month.

10 Press the [ ] or [ ] button to select the desired month, then press the [ ] button.

The cursor moves to the time.

11 Press the [ ] or [ ] button to select the desired time, then press the [ ] button.

The cursor moves to the minutes portion of the time. Set the desired minutes in the same manner.

Use the same procedure when setting the time at which daylight savings time is to end. The <DAYLIGHT SAVING> settings are now finished.

<EXT. CLOCK SET> settings

This section describes how to have the time synchronized automatically when two or more digital video recorders are connected. When “ADJUST. TIME” is set, all connected devices are adjusted every day to the time that has been set on the first device (to the nearest second).

(Default setting: 01:00)

1 Use a cable to connect the CLOCK OUT terminal on the rear panel of one digital video recorder to the CLOCK IN terminal on the second digital video recorder.

1st DVR

	CLOCK
COM	IN	OUT
2nd DVR	CLOCK
COM	IN	OUT
To 3rd DVR	COM	CLOCK IN

zDo not use a loop connection.

2 Press the [ ] or [ ] button to move the cursor to “ADJUST. TIME”.

SETTINGS <MAIN MENU 1>

50 English