Sanyo DSR - 300 manual 106, Select a mode using Alarm Recording, Select REC Rate, Using Duration

2 MENU-SPECIFIC SETTINGS

(when optional interface board is installed)

Setting audio recording

Audio can be recorded together with images when performing alarm recording. Note, however, that since this audio data will also be stored in the alarm recording area, the recording time for this area will be reduced.

3 Select “AUDIO RECORDING”.

[Settings] (‹ indicates default setting.)

	Setting	Description
	ON	Audio will be recorded.
‹OFF		Audio will not be recorded.

zAudio recording can only be specified when the recording rate is more than A 5.00/10.00 FPS.

Setting alarm recording

In order to carry out alarm recording, it will be necessary to set operation patterns and recording conditions.

4

5 6

4 Select a mode using “ALARM RECORDING”.

[Settings] (‹ indicates default setting.)

Setting	Description
‹OFF	Does not perform alarm recording.
ENABLED	Alarm recording is always performed,
	regardless of timer recording or timer settings.
AL-REC ON	Alarm recording is performed only during timer
TIMER	recording.
AL-REC OFF	Alarm recording is performed only during
TIMER	recording other than timer recording.
OLY AL-RC	Alarm recording is performed only in the
	period set for timer recording without timer
ON TMR
	recording actually being performed.
5 Select “REC RATE”.
A 30.00/60.00, A 15.00/30.00, A 10.00/20.00, A 7.50/15.00,
A 5.00/10.00, 3.75/7.50, 3.00/6.00, 2.50/5.00, 2.14/4.29,
1.88/3.75, 1.67/3.33, 1.50/3.00, 1.36/2.73, 1.15/2.31,
1.00/2.00, 0.83/1.67, 0.71/1.43, 0.63/1.25, 0.56/1.11,
0.50/1.00, 0.25/0.50, 0.17/0.33, 0.13/0.25, 0.10/0.20,
		NETWORK SETTINGS
using “DURATION”.
0.05/0.10, 0.03/0.05, 0.02/0.03 (Unit: FPS)

6 Set the duration for alarm recording

1 SEC, 2 SEC, 5 SEC, 10 SEC, 20 SEC, 40 SEC, 1 MIN, 2 MIN, 3 MIN, 4 MIN, 5 MIN, 10 MIN, 15 MIN, *CC (Default setting: 1 SEC)

*CC: Operates while an alarm is being activated.

106 English