Introduction, Main features, Accessories | Sanyo DSR - 300 specs

INTRODUCTION

Main features

This digital video recorder can be used to store images recorded by monitoring cameras onto a removable HDD.

Supports removable HDDs

This feature allows you to remove and store HDDs containing important recordings.

Complete range of recording/playback functions

z You can play back and record images at the same time.

z Using timer recording, it is possible to make recordings at different times each day.

z You can record and play back audio.

z Pre-alarm recording allows you to record images from up to 15 minutes ahead of an alarm.

z Using the integrated motion-detector function, you can trigger alarm recording in response to the detection of motion.

z Both field recording and frame recording are supported for image acquisition.

Search function - lets you instantly display the desired image. (JP. 29)

z Searching in order of alarm occurrence

z Searching by thumbnail using alarm search z Searching of the archive area

z Searching by date/time

z Searching for intruder motion using motion detection search

The security lock function lets you restrict users for data and equipment management. (JP. 72)

Expandable, can be connected to a PC

z Support for CompactFlash cards allows recorded images to be copied.

z Images can be recorded to the hard disk and played back from the multiplexer.

z When the separately sold VZU-COM300 interface board is installed, network control is enabled and it will be possible to monitor the unit’s images, to perform playback and search, and to make menu settings from a remote location.

In addition, PC control can be performed using an RS-232C cable, and a system controller (sold separately) can be connected via RS-485.

z Remote control is possible with the wired remote control unit (sold separately). (JP. 16)

Accessories

Check that you have all the parts below.

Power cord

AC adapter

* Do not use the AC adapter with other equipment.

Ferrite core (2)

1 pc.: For the DVR power cord (accessory)

1 pc.: For the LAN connection cable (packaged together with the option RS-485/ 232C/LAN interface board)

Power cord tie

Instructions

CD-ROM

Removable HDD tray

Tray release keys (2)

HDD fastening screws (4)

2

English

Image 3

Sanyo DSR - 300 manual Introduction, Main features, Accessories

Contents

Page Service Precaution Main features AccessoriesIntroduction Symbols used in this manual CopyrightIntroduction Contents Contents Settings Contents Interface Specifications Network SettingsNetwork Control Specifications Contents Network Operation Hard disk and cooling fan are expendable items Installation conditionsBefore USE Conditions to avoid Before USE Replace the cover ReplacementReplacing a Removable HDD Assemble and tighten the 4 screws Removal Replacing a Removable HDD Pull the HDD tray out using the handle Front panel Names and Functions of Parts Names and Functions of Parts Rear panel ALL Reset switch Basic connections Installation and ConnectionsConnecting a remote control circuit Connecting cables to the control and alarm terminals Installation and Connections Connecting a multiplexerMaking analog series connections If you disconnect the power cable Connecting the power cord Operation display area Preparing for USE Selecting the recording method Preparing for USEChanging the position of the operation display area Built-in hard disk Press the Menu button Setting the LANGUAGE/CLOCKWhen you have made a selection, press the button To change the language Press the or button to select Press the button Setting the LANGUAGE/CLOCKSetting the time Press the button Normal RECORDING/TIMER Recording Timer recordingNormal recording When alarm input is detected Alarm and PRE-ALARM RecordingAlarm recording Set alarm recording If an alarm is detected Alarm and PRE-ALARM RecordingPre-alarm recording Set pre-alarm recording Playback Fast-forward playback/fast-rewind playbackPress the PLAY/STOP button During playback, press the Still Button Normal RECORDING/TIMER Recording PlaybackViewing still images Frame advance forward/reverse Press the or button to specify a channel Switching between frame and field playbackPlayback with a channel specified for the camera image Press the Channel button while a still image is displayed Archive Area Search JP Alarm Search JPSearching for Recorded Images TIME/DATE Search JP Press the or button to select the image to play back Searching for Recorded Images Alarm SearchCheck that Alarm Search is selected, and press the button During playback, press the Alarm button Press the or button to select TIME/DATE Search Searching for Recorded Images Alarm Thumbnail SearchTIME/DATE Search Press the or button to select Searching for Recorded Images Press the button and set the date/ time to searchPress the button to select VIEW, then press the button Press the or button to select the image for playback ‹ALARMSearching for Recorded Images Archive Area Search Motion Detection Search Motion Sensor Set the motion sensor „ If not FOUND! is displayed Move the cursor to Exit and press the or buttonPress the or button to select Preview Press the button Press the or button to select View Press the button Copying an image to a CompactFlash card or Microdrive JP Saving & Copying Recorded ImagesCopying an image to the hard disk’s archive area Copying an image to the hard disk’s archive area JP Press the button, then the or button to select Minutes Saving & Copying Recorded ImagesPress the Copy button Press Button Removal method Insert the CompactFlash cardPress the button Press the or button to select Pictures Insertion method Copying frame-recorded images to a CompactFlash card Recording area in CompactFlash cardsMove the cursor to Start and press the button Jpeg images Saving on a CompactFlash card Saving Menu SettingsLoading settings from a CompactFlash card To leave the Copy Menu Settings screen, press the button When copying recording area settings Saving Menu Settings Moving to a sub-menu from Main Menu 1 or Menu Configuration and OperationsDisplaying menu screens and setting screens Press the or button to select a menu Overview of Main Menu 1 sub Menu Configuration and OperationsTo restore menu setting items to their Default values Overview of Main Menu 2 sub- menus Normal REC Mode SET JP Network SET JP Security Lock SET JP Lets you set passwords Frame recording „ When recording with an 80-GB hard disk at 100% capacityTable of recording rate and times Field recording „ When recording with a 160-GB hard disk at 100% capacity Recording time Daylight Saving settings Press the or button to change the settingLANGUAGE/CLOCK SET LANGUAGE/CLOCK SET EXT. Clock SET settingsPress the or button to move the cursor to ADJUST. Time When USE is selected for Daylight Saving Flashes Press the or button to select the multiplexer to be used Settings for multiplexer connectionVideo Input SET Select 2. Video Input SET, and press the button Select 3. Recording Area SET and press the button „ Default hard disk settingsRecording Area SET Displaying the recording area „ Recording area allocations Recording Area SETChanging recording areas With Normal Recording Area selected, press the button To finish this process Setting overwrite permissionSetting overwriting for the normal recording area Setting overwriting for the alarm recording area ‹OFF Setting series recordingRecording Conditions SET Select 4. Recording Conditions SET and press the button OFF Recording Conditions SETPress the button, then press the or button to select OFF Example 5% Setting Auto Delete Example Normal REC Mode SETSelect 5. Normal REC Mode SET and press the button Example on Start Timer SETTimer setting items Select 6. Timer SET and press the button Press the or button to change SUN to DLY Timer SETTo cancel all set timer reservations Select 6.TIMER SET and press the button Timer reservations spanning more than 24 hours Set the end Week and Stop time. Switch SET to onSet the items in the Week and Start columns Example To set November 17 as a holiday After entering the setting, press the buttonHoliday SET Set the month and day in item No Change the setting Alarm REC Mode SETSetting alarm recording Select 8. Alarm REC Mode SET and press the button When alarm recording settings have been completed Alarm REC Mode SET Alarm or Setting pre-alarm recordingSetting the alarm trigger When settings have been completed Move the cursor to Motion Sensor and press the button Setting the motion sensor Press the Menu button twice Display SET and Video Loss SET setting itemsSettings DISPLAY/VIDEO Loss SET Settings for RS-232C and RS-485 When RS-232C is selectedSelect RS-232C and press the button Press Button, then the or Button to set the data speed, When RS-485 is selectedRS-232C/RS-485 SET Select RS-485 and press the button Buzzer SET Buzzer SET screen setting items Password setting example Security Lock SET screen setting itemsSecurity Lock SET Press the and buttons to select the character to enter Setting passwordsWhen you have finished making the setting, press the button Security Lock SET Example a Setting the user passwordExample Setting AB123456 Press the and buttons to select ON, then press the button To check the security lock, press any button Setting the security lock Making network connections Network SET Making network settings Network SETDisplay Press the or button to select ID1 Password settingPress the , , , and buttons to input the password Example Setting AB123456 to ID1 Initializing the hard disk HDD SET Firmware Power FAILURE/USED TimeRecover Failure Interface Specifications RS-232CRS-485 Cable types Setting the RS-485 termination switchTermination settings Connection Commands „ /CLEAR 53H Commands for setting the recorderOn-screen commands „ Menu 74H Commands for acquiring information Normal REC Timer ST-BY Normal REC FullAlarm REC Full Bit assignments in Status Sense D7H data bytes Byte Example Group number Commands RS-485 onlyExample Setting group number „ RS-485 RCV CMF FEH Return codes Command table Page Manual for Remote Operation By Network Connection Saving and playing back sound Network settingsNetwork Control Function Operations possible with PC control Click OK Network Control FunctionClick Network Connections Click Properties Launch the PC’s web browser Enter a password for verification purposesPreparing for Network Control Controlling from a PC Entering the operation screen Preparing for Network Control Controlling from the unit Messages displayed when connectedWhen control rights are switched to When control rights are switched to the unit Recording buttons Setting buttonsChannel and screen selection buttons Playback buttons Settings Making menu selectionClick the button on the operation panel Menu structure MENU-SPECIFIC Settings Clock SETDaylight SAVING/EXT. Clock SET Multiplexer MENU-SPECIFIC Settings100 Video Input SET Area-specific capacity display Recording area reset101 Total capacity display Select Overwrite for normal recording area Select Overwrite for alarm recording areaSetting the remaining-space warning level 102 103 Normal REC Mode SET 104 „ Performing timer recording„ Overlapping of timer reservation times „ Setting a timer for over 24-hours continuous recording 105 Holiday SETSpecify the day to be treated as a holiday 106 Select a mode using Alarm RecordingUsing Duration Set the duration for alarm recording Make a selection for REC Rate Select on or OFF using PRESet the duration for pre-alarm recording using Duration 107 Set the motion sensor level Click the location where the motion sensor is to be setup108 Display SET To sound a buzzer on the PC Select on or OFF for the alarm buzzer109 Buzzer SET 110 Change the settings as requiredChanging network-related settings Password Setting Hard disk capacity Power FAILURE/USED Time111 HDD SET Stopping normal recording Canceling timer recordingRecording Images 112 Playing back recorded images Watching Images113 Watching live images during playback Specifying the channel camera number Performing operations in play mode114 Watching Images Adjusting the image and audio 115Screen display items Set Save to PC to on and then click SET Settings for downloading live images to a PCSet the download time using Duration 116 Click Start „ To cancel a save operation117 Click Browse Basic operation Search ModeSearch for images using the search mode screen 118 119 Operations in Search Modes Click Preview 120Operations in Search Modes Select 3. TIME/DATE Search from the Search menu Setting motion sensor detection conditions 121Select 5. Motion Detection Search from the Search menu Copying to Archive Area 122Copying to the archive area Click Button on the operation Panel 123 Saving Recorded ImagesDownloading to a PC Image viewer screen 124 Operating environment Installing the DVR ViewerDVR Viewer 125 126 DVR ViewerOpening and closing DVR Viewer Toolbar 127Opening files Click Open O in the File F menu Thumbnail window 128Viewing images Main window 11IMAGE Number 129TOP Prev Printing images 130 Click Start Copy 131Saving images Specify the start image and end image to be saved Jpeg SpecificationsSpecifications 132 133 Dimensions Exclusions Weekdays 830 AM 500 PM Pacific TimeLabor Parts Year