Sanyo DSR - 300 manual Settings for RS-232C and RS-485, Select RS-232C and press the button

2RS-232C/RS-485 SET

(when optional interface board is installed)

<MAIN MENU 2> [MENU] button [ ] button [ ] button [ ] button

[ ] button [EXIT/OSD] button

Settings for RS-232C and RS-485

This section describes the settings to be made for communicating using an RS-232C or RS-485 cable. (A separately-sold option board will be required in such a case.)

1 Press the [MENU] button twice.

The <MAIN MENU 2> screen appears.

2 Press the [ ] or [ ] button to select “2. RS-232C/RS-485 SET”, and press the [] button.

The <RS-232C/RS-485 SET> screen appears.

3 Press the [] button.

“RS-232C” flashes. Press the [ ] or [ ] button to select either “RS-232C” or “RS-485”.

When RS-232C is selected

Connect a special RS-232C cable (sold separately) between this unit’s RS-232C port and the PC.

PC

RS-232C terminal

4 Select “RS-232C” and press the [ ] button.

The cursor moves to “DATA SPEED”.

5 Press the [ ] button, then the [ ] or [ ] button to select the “DATA SPEED”.

Possible selections: 2400, 4800, 9600, and 19200

6 Press the [EXIT/OSD] button.

The display returns to the normal screen.

English 69