Sanyo DSR - 300 manual Password setting, Press the or button to select ID1

5 NETWORK SET

(when optional interface board is installed)

6 Move the cursor to “GATEWAY” and press the [ ] button, then press the [ ], [ ], [ ], and [ ] buttons to change the setting.

(Example: 0.0.0.0)

7 Move the cursor to “PORT” and press the [ ] button, then press the [ ], [ ], [ ], and [ ] buttons to change the setting.

(Example: 00080)

When connecting the digital video recorder to a network, check the following settings with the network administrator.

zIP address

zSubnet mask

zGateway

zPort number

Password setting

Three access levels are setup for network connection, and a password is set for each. Passwords can be between 4 and 8 alphanumeric characters.

z“ID” or “PASSWORD (4-8)” at the top of the screen is the screen title. You cannot move the cursor to this item.

Example: Setting “AB123456” to “ID1”

1 Press the [ ] or [ ] button to select “ID1”.

[Settings]

Setting	Description
ID1	Allows images to be monitored via the network.
	Allows images to be monitored and the playback or
ID2	search/playback of recorded images via the
	network.
ID3	Allows all of this unit’s operations and settings to be
	performed.

2 Press the [ ] button.

The first password entry item “1” flashes.

Characters that can be entered in passwords: 0 to 9, A to Z

3 Press the [ ], [ ], [ ], and [ ] buttons to input the password.

(1)Press the [ ] or [ ] button to select “A”, then press the [ ] button.

(2)The second entry item “1” flashes. Press the [ ] or [ ] button to select “B”, then press the [ ] button.

(3)The third entry item “1” flashes. Use the above procedure to select “AB123456”.

4 When you have finished making the setting, press the [ ] button.

5 Where necessary, use the same procedure to set the “ID2” and “ID3” passwords.

6 Press the [EXIT/OSD] button.

The display returns to the normal screen.

SETTINGS <MAIN MENU 2>

78 English