Sanyo DSR - 300 manual 102, Select Overwrite for normal recording area

2 MENU-SPECIFIC SETTINGS

(when optional interface board is installed)

5. RECORDING CONDITIONS SET

Set the permission for overwriting to recording areas or the remaining-space warning level as described below.

1

2

3

4

Setting overwriting permission for the normal recording area

When the normal recording area has been filled with data, this setting dictates whether recording will be stopped or continued by overwriting the recorded images currently stored on the hard disk.

1 Select “OVERWRITE” for normal recording area.

[Settings] (‹ indicates default setting.)

Setting	Description
	When the normal recording area has been filled with
‹ON	data, overwriting from the beginning of this area will
	start automatically.
OFF	Recording is stopped when the normal recording area
	has been filled with data.

Setting overwriting permission for the alarm recording area

When the alarm recording area has been filled with data, this setting dictates whether recording will be stopped or continued by overwriting the recorded images currently stored on the hard disk.

2 Select “OVERWRITE” for alarm recording area.

[Settings] (‹ indicates default setting.)

Setting	Description
	When the alarm recording area has been filled with
‹ON	data, overwriting from the beginning of this area will
	start automatically.
OFF	Recording is stopped when the alarm recording area
	has been filled with data.

Setting the remaining-space warning level

In situations where the overwrite setting for the normal recording area and the alarm recording area is “OFF”, you can have the unit issue a warning as soon as the remaining space in either of these areas reaches a specific level. (JP. 109)

The following section describes how to set the level at which the warning will be issued.

3 Setting the remaining-space warning level.

Setting range: 1% to 10% (in units of 1%)

zIf the overwrite setting for the normal recording area and the alarm recording area is “ON”, the remaining- space warning level will be displayed as “**” and setting will not be possible.

4 Click [SAVE].

The new setting is saved.

NETWORK

SETTINGS

102 English