Sanyo DSR - 300 manual Set the motion sensor, Motion Sensor

6SEARCHING FOR RECORDED IMAGES

4 Press the [ ] or [ ] button to select the searching range, then press the [ ] button.

(Example: Normal)

The cursor moves to “CHANNEL”.

zWhen “NO USE” is set for “MULTIPLEXER” (JP. 52) in “2. VIDEO INPUT SET”, the cursor will move to “START PREVIEW”.

5 Press the [ ] button, then the [ ] or [ ] button to select a camera number.

The channel number flashes.

6 Press the [ ] button.

(Selection example: 4) The cursor moves to “START PREVIEW”.

7 Press the [ ] button.

The screen changes and the preview screen for camera number “4” appears.

(1)

(2)

(3)

(5)

(1) START:

The date and time for the initial screen stored in each recording area are displayed.

(2) END:

The date and time for the final screen stored in each recording area are displayed.

(3) MOTION SENSOR:

The motion sensor is displayed.

(4) PREVIEW:

The selected start time is displayed.

(5) VIEW:

The selected image is played back on the entire screen.

8 Set the motion sensor.

(1)Press the [ ] button.

(2)Press the [ ] or [ ] button to set the start date and time (i.e., 10 AM on the same day) for the motion

sensor, then press the [ ] button.

The image for the selected time is displayed in the preview screen. The cursor moves to the end date and time.

Set the start date and time

(3)Press the [ ] button.

(4)Press the [ ] or [ ] button to set the end date and time (i.e., 8 PM on the same day) for the motion

sensor, then press the [ ] button. The cursor moves to “MOTION SENSOR”.

Set the end date and time

OPERATION

34 English