Sanyo DSR - 300 manual Searching for Recorded Images Archive Area Search, Motion Detection Search

6SEARCHING FOR RECORDED IMAGES

ARCHIVE AREA SEARCH

Follow the procedures below to playback images from the archive area.

1 Press the [SEARCH] button while the digital video recorder is recording or stopped.

The <SEARCH> screen is displayed.

2 Press the [ ] or [ ] button to select

“ARCHIVE AREA SEARCH”.

3 Press the [ ] button.

The <ARCHIVE AREA SEARCH> screen is displayed.

(1) (2) (3) (4) (5)

(1)NO: Displays the archive number.

(2)DATE: Displays the date of the recorded image.

(3)START: Displays the start time for the recorded image.

(4)TOTAL: Displays the total capacity of the archive area.

(5)USED: Displays the amount of archive area capacity currently filled.

4 Press the [ ] or [ ] button to select the image for playback.

The selected image is displayed in the preview screen.

zTo display the next (previous) image Press the [ ] or [ ] button.

zTo end search mode

Press the [SEARCH] button.

5 Press the [ ] button.

The image is played back on the full screen.

MOTION DETECTION SEARCH

By setting images recorded in the hard disk’s normal recording area (i.e., normal recording and timer recording images) or alarm recording area to the motion sensor, variations from these images as a result of the presence of an intruder or the like can be detected, and the corresponding images can be played back.

zWhen performing a motion detection search for a multiplexer image, set “MULTIPLEXER” from “2. VIDEO INPUT SET” to anything other than “NO USE”. (JP. 52)

zWhen a multiplexer capable of decoding channel information is connected, a camera number (or channel) can be specified, and the corresponding camera image can be detected. This type of setting will not be possible for any other type of multiplexer.

(JP. 28)

1 Press the [SEARCH] button while the digital video recorder is recording or stopped.

The <SEARCH> screen is displayed.

2 Press the [ ] or [ ] button to select “MOTION DETECTION SEARCH”, then press the [ ] button.

The <MOTION DETECTION SEARCH> screen is displayed.

3 Press the [ ] or [ ] button to select “SEARCH FROM”, then press the [ ] button.

“ALARM” flashes.

[Settings] (‹ indicates default setting.)

Setting	Description
‹ALARM	Searching will only be performed for images in the
	alarm recording area.
NORMAL	Searching will only be performed for images in the
	normal recording area.
ALARM &	Searching will be performed for images in the
NORMAL	alarm recording area and normal recording area.

English 33