Sanyo DSR - 300 manual Connecting the power cord, If you disconnect the power cable

4INSTALLATION AND CONNECTIONS

Connecting the power cord

1 When you have finished making all the other connections, insert the power plug into the wall outlet.

There is no power switch. The display indicators flash, and after a few moments, the monitor screen displays the camera image.

*

*Attach the supplied ferrite core to the base of the power cable (coiling not necessary).

zWhen turning the power ON for the first time “PLEASE SET THE CLOCK” is displayed on the monitor screen. Follow the procedures on P. 22 to set the clock.

zIf the clock is already set

The operation display area is displayed.

Operation
	01- 01- 04
display area
	00: 00: 00	EN 10FPS

zIf the CHANGE DISK indicator is flashing in red The digital video recorder has a self-check function that

indicates problems. If there is a problem at power ON or during operation, the type of problem is indicated by how rapidly the CHANGE DISK indicator flashes. Contact a Sanyo Authorized Service Centre if the CHANGE DISK indicator flashes.

4 flashes per second:

The hard disk is checked automatically at power ON. If a hard disk problem is found, the CHANGE DISK indicator flashes, and the hard disk must be replaced or reformatted. If you need to save images stored on the disk, contact a Sanyo Authorized Service Centre.

1 flash per second: Fan problem

zIf you disconnect the power cable

Do not move the recorder or subject it to vibration for at least 30 seconds after turning OFF the power.

The disk in the hard disk drive briefly keeps spinning after power OFF due to inertia, during which time the head is unstable. At this time, the disk is sensitive to shocks or vibrations, so avoid even light shocks.

INTRODUCTION

18 English