Sanyo DSR - 300 manual Recording Images, 112, Stopping normal recording, Canceling timer recording

1RECORDING IMAGES

(when optional interface board is installed)

This section will describe the way in which monitored images and alarm images can be stored on the unit’s internal hard disk.

Before any of these operations can be carried out, it will be necessary to make menu settings to match the installation environment. (JP. 98)

Normal recording

Monitored images can be recorded to the normal recording area by a manual operation.

1 Click the button on the operation panel.

Normal recording starts.

Stopping normal recording

2 Click the button on the operation panel.

Timer recording

Monitored images can be automatically recorded to the normal recording area in accordance with timer settings. Note that timer recording will not operate during normal recording.

1 Set the conditions for timer recording using the timer setting menu screen. (JP. 104)

2 Click the button on the operation panel.

The unit will enter standby mode for timer recording, and recording will then start and stop automatically at the set times. The current condition for timer recording is displayed on-screen using the message “TIMER STANDBY” or “TIMER RECORDING”.

Canceling timer recording

3 With “TIMER STANDBY” displayed,

click the button on the operation panel.

Alarm recording

When an alarm is detected by the alarm input terminal or a motion sensor, the recording of alarm images to the alarm recording area will start automatically.

Whenever alarm recording starts, normal recording, timer recording, and pre-alarm recording will be automatically terminated, and they will be automatically restarted as alarm recording ends.

1 Set the conditions for “ALARM RECORDING” using the “ALARM REC MODE SET” menu screen. (JP. 105)

(1)Regardless of the unit’s current operation or condition, alarm recording will be started automatically whenever an alarm is detected.

(2)When the duration set for alarm recording has ended, alarm recording will be automatically stopped.

zDuring alarm recording, a sound file from a specific folder on the PC can be played repeatedly to sound a unique alarm.

(1)Create a sound file (WAV) for the alarm.

(2)Apply the following name and store the file on the PC.

“C:\BUZZER\BUZZER.WAV”

When the alarm sound stops during alarm recording, click the stop button on the operation panel.

Pre-alarm recording

When pre-alarm recording has been setup, the same images as for normal recording will be constantly recorded to the alarm recording area as complementary images for alarm recording. Since advance images of a preset duration are overwritten and saved, it will be possible to view images from immediately before an alarm when alarm recording is being played back.

1 Set the conditions for “PRE-ALARM RECORDING” using the “ALARM REC MODE SET” menu screen. (JP. 107)

(1)The newest images from the preset duration will be automatically recorded and updated by overwriting.

(2)Pre-alarm recording will be automatically terminated whenever alarm recording starts, and it will be automatically restarted as alarm recording ends.

NETWORK OPERATION

112 English