Sanyo DSR - 300 manual 110, Change the settings as required, Changing network-related settings

2 MENU-SPECIFIC SETTINGS

(when optional interface board is installed)

13. NETWORK SET

Network settings must be made in advance on the unit whenever it is to be controlled via a network. Once this has been done, settings can then be changed from the controlling PC.

zChanging network-related settings

When these settings are modified, connection will be canceled and control rights will be returned to the unit. To restore the connection, repeat network settings on the PC to match the modified unit settings.

(1)

(2)

(3)

(4)

(5)

(6)

2

1 Change the settings as required.

	Item	Description
(1)	IP ADDRESS	Allows the unit’s IP address to be
		modified.
(2)	SUBNET MASK	Allows the unit’s subnet mask to be
		modified.
(3)	GATEWAY	Allows the unit’s gateway to be modified.
		Allows the unit’s port number to be
(4)	PORT	modified. Set within the range of 1 to
		65535. (default setting: 80)

zIf a value other than “80” is set as the default value for the port, when specifying the URL, enter a colon (:) and then the port number after the IP address.

For example, if the port number was set as “81”, you should enter

http://192.168.0.1:81/

(5) PASSWORD SETTING

This item allows you to set a password for each different user level.

User level			1	2	3
User name			ID1	ID2	ID3
		Monitoring of live images
		Monitoring and searching
Usable		of recorded images
menus	Starting and stopping of
		recording; timer recording;
		modification of unit
		settings, etc.
Password (default setting)			1111	2222	3333

zUse between 4 and 8 alphanumeric characters for passwords.

(6) NETWORK SPEED

This item lets you modify the network speed setting.

NO LIMIT, 64, 128, 256, 512, or 1024 kbps

When the unit is reset, the network speed setting will revert to the default value (i.e., NO LIMIT).

2 Click [SAVE].

The network settings or modifications are saved.

NETWORK

SETTINGS

110 English