Sanyo DSR - 300 manual Searching for Recorded Images Alarm Search

6SEARCHING FOR RECORDED IMAGES

ALARM SEARCH

Lets you search and play back all the alarm images stored in the alarm recording area. If pre-alarm images are being recorded, playback will start from immediately before the alarm.

[SEARCH] button [ ] button [ ] button

[ALARM] button [ ] button

1 Press the [SEARCH] button while the digital video recorder is recording or stopped.

The <SEARCH> screen is displayed.

2 Check that “ALARM SEARCH” is selected, and press the [] button.

The <ALARM SEARCH> screen is displayed.

(1) (2) (3)

(4)

(1) NO:

Displays the alarm number.

(2) DATE/TIME:

Displays the date/time at which the alarm was received and the image recorded.

(3) TOTAL ALARMS:

Displays the total number of recorded alarm images.

(4) Preview screen:

Displays the selected alarm image.

3 Press the [ ] or [ ] button to select the image to play back.

The selected alarm image is displayed in the preview screen. You can display up to 8 alarm images.

zTo display the next (previous) image Press the [ ] or [ ] button.

zTo display the items on the next page

Press the [ALARM] button. The next 8 items are displayed chronologically.

zTo end search mode Press the [SEARCH] button.

4 Press the [ ] button.

The selected image is played back on the full screen.

„To display pre-alarm images

After starting playback of alarm images found using an

alarm search, press the [ ] button to activate reverse playback.

Skipping can be carried out during playback

1 During playback, press the [ALARM] button.

05- 20- 04	ALARM	0003
01: 06: 00	EN	10FPS

zPlayback will skip to the next earlier alarm image when

the button is pressed.

zPlayback will skip to the next later alarm image when

the button is pressed.

zWhen playback is performed using an alarm search, the image at the start and end of each alarm recording will be paused.

Play the final alarm image using the [ALARM] button.

OPERATION

30 English