Video
Input Signal | Analog RGB 0.7Vpp | Digital TMDS | |
Input Impedance | 75 Ohm ± 2% |
| |
Polarity | Positive, Negative | TMDS | |
Amplitude | 0 - 0.7 ± 0.05 Vpp | ||
Horizontal Frequency: 30 ~ 80 KHz | 30~64KHz | ||
|
| Vertical Frequency: 56 ~ 75 Hz | 56~75 Hz |
Audio |
|
| |
Input Signal | 500mVrms |
| |
Audio Power Output | 1Wrms + 1Wrms Max |
| |
Speaker | 2W 8Ω x 2 |
| |
Composite Signal and |
| ||
Input Signal | Composite Video (NTSC/PAL) | ||
Input Impedance | 75 Ohm ± 2% |
| |
Amplitude | 0 - 0.7 ± 0.05 Vpp |
| |
Control | On/Off switch with LED indicator |
| |
Power switch | (hard and soft types) |
| |
OSD | Digital |
| |
Brightness |
| ||
Contrast | Digital |
| |
Horizontal Position | Digital |
| |
Vertical Position | Digital |
| |
Phase | Digital |
| |
Clock | Digital |
| |
Display Mode Setup | Use EEPROM to save settings in memory | ||
OSD Format | 20 characters x 9 rows |
| |
Power Management |
|
|
Mode
Power Consumption*
AC Input
LED Color
On | 55W maximum | 240 VAC | Green | |
Off | 5W maximum | 240 VAC | Yellow | |
Soft switch off | 5W maximum | 240 VAC | Dark | |
Disconnected | 5W maximum | 240 VAC | Yellow: Standby, Suspend, Off | |
Dark: DC Power off | ||||
|
|
|
*Meeting VESA DPMS requirements measured from AC Input end of AC adapter.
Sync Input
Signal
Polarity
Plug & Play External Connection
Separate TTL compatible horizontal and vertical synchronization Digital TMDS
Positive and negative
Supports VESA DDC1 and DDC2B functions
Power Input (DC input) | +12VDC / 5A min. input through AC/DC adapter | |
VGA Cable | 1.8M with | |
Audio Cable | 1.8M with Stereo Jack |
|
Audio Video Cable | 1.8M with Audio Video Jack (Red + White + Yellow) | |
1.8M with | ||
Environment |
|
|
Operating Condition: | Temperature | 5°C to 40°C/41°F to 104°F |
Storage Condition: | Relative Humidity | 20% to 80% |
Temperature | ||
| Relative Humidity | 5% to 85% |
| 8 |
|