6SEARCHING FOR RECORDED IMAGES

9 Press the [ ] button.

The motion sensor setting screen is displayed. Motion sensors should be set at locations where movement is to be detected and viewed.

See “Setting the motion sensor” (JP. 67) for details.

Setting example

10 Move the cursor to “EXIT” and press the [ ] or [ ] button.

The display returns to the <MOTION DETECTION SEARCH> screen.

11 Press the [ ] or [ ] button to select “PREVIEW”.

12 Press the [ ] button.

Each time the [ ] button is pressed, a different motion sensor screen will be displayed on the preview screen.

„If “NOT FOUND!” is displayed

No motion sensors have been set. A motion sensor must be set to allow a screen to be displayed.

Viewing a motion sensor on-screen

1 Press the [ ] or [ ] button to select “VIEW”.

2 Press the [ ] button.

Normal playback will be started for the specified image.

Using this unit in combination with a multiplexer

zBy specifying the camera number (or channel) and performing “MOTION DETECTION SEARCH”, playback can be carried out for only the specified camera number.

In such a case, the multiplexer title information, date information, and/or time information may partially disappear.

zTo playback an image from a different camera, stop playback and then repeat the setting process from the beginning.

English

35

Page 36
Image 36
Sanyo DSR - 300 Move the cursor to Exit and press the or button, Press the or button to select Preview Press the button