Sanyo DSR - 300 manual 109, Buzzer SET, Select on or OFF for the alarm buzzer

2 MENU-SPECIFIC SETTINGS

(when optional interface board is installed)

11. RS-232C/RS-485 SET

This screen displays settings relevant to the unit’s interfaces.

zIt will not be possible to modify settings: The screen displays data for confirmation purposes only.

(1)

(2)

(3)

(4)

(5)

	Item	Overview	Setting	Description
(1)	CONTROL	Displays the type if interface being	RS-232C	When RS-232C is being used.
		used for control of the unit.	RS-485	When RS-485 is being used.
(2)	DATA SPEED	Displays the RS-232C or RS-485	2400/4800/9600/
		communication speed.	19200 (bps)
		Displays whether or not status	ON	Status information will be transmitted.
(3)	STATUS INFO	information will be transmitted
			OFF	Status information will not be transmitted.
		during RS-485 communication.
		Displays whether or not alarm	ON	Alarm information will be transmitted.
(4)	ALARM INFO	information will be transmitted
			OFF	Alarm information will not be transmitted.
		during RS-485 communication.
(5)	ADDRESS	Displays the address when RS-485	0 to 127	Set within the range of 0 to 127.
		has been selected.

12. BUZZER SET

Set a warning buzzer to sound for alarms or when the hard disk space reaches zero as described below.

1 Select “ON” or “OFF” for the alarm buzzer.

zTo sound a buzzer on the PC

Create a folder named BUZZER in the PC’s root directory, and save the sound file to use as the buzzer tone as C:\BUZZER\BUZZER.WAV.

When a PC-monitored DVR generates an alarm, the PC also sounds a buzzer, using the saved sound file.

(1)

(2)

(3)

(4)

(5)

(6)

2

	Item	Default setting	Description
(1)	ALARM	OFF	Sounds a buzzer when an alarm is detected.
(2)	DISK FULL	ON	Sounds a buzzer when the amount of data stored in each of the hard disk’s recording areas has
			reached the remaining-space warning level. (JP. 102)
(3)	DISK ERROR	ON	Sounds a buzzer when a hard-disk error occurs.
	LOCK		Sounds a buzzer when an operation button not permitted for the current user level is pressed while
(4)		ON	the security lock is set. Specifically, the buzzer sounds twice with an interval of approximately 0.5
	WARNING
			seconds.
(5)	KEY IN	OFF	The buzzer emits a key-operation sound each time a button is pressed.
(6)	NON REC	OFF	Sounds a buzzer when recording is stopped.
2	Click [SAVE].

The new settings are saved.

English 109