Sanyo DSR - 300 manual Replacing a Removable HDD, Removal

2REPLACING A REMOVABLE HDD

5 Insert the tray release key, turn it in the direction of the arrow, and then press the [CHANGE DISK] button.

The HDD indicator will light up and the CHANGE DISK indicator will switch from green to red.

CHANGE DISK indicator

zWhenever the unit is to be transported, ensure that the HDD tray is removed from the unit and packaged separately.

zCorrect operation cannot be guaranteed with HDDs not recorded to using a DSR-300. If you want to use a HDD that has been recorded on by a different DVR, be sure to initialize it before use.

zEven if the tray to which the HDD has been attached is connected directly to a PC, the playback of images will not be possible.

zIf you cannot turn the tray release key when installing the HDD tray, the HDD tray may have shifted. Reposition the HDD tray properly.

Removal

1 With the power turned on, press and hold the [CHANGE DISK] button for at least 2 seconds.

The CHANGE DISK indicator changes from red to flashing green, then lights steadily after 10 seconds. A buzzer sounds intermittently in time with the indicator’s flashing. The HDD indicator turns off.

[CHANGE DISK] button

HDD indicator

2 When the CHANGE DISK indicator lights in green and the HDD indicator turns off, insert the tray release key and turn it in the direction of the arrow.

This action will cause the HDD tray lock to be released.

CHANGE DISK indicator

zAn alarm will be sounded if the tray release key is turned when the CHANGE DISK indicator is lit in red or before the HDD indicator has turned off. Do not remove the HDD tray while such an alarm is sounding. Failure to observe this precaution can result in data being damaged.

zDo not forcibly pull out the HDD tray when the tray release key is ON as this will result in the tray being damaged.

zIf you cannot turn the tray release key when installing the HDD tray, the HDD tray may have shifted. Reposition the HDD tray properly.

zBecause data might be damaged, a warning tone will sound if the tray release key is turned without pressing the [CHANGE DISK] button while the power is on.

zIf the HDD is removed without using the [CHANGE DISK] button, there is a danger that recorded data may be lost.

zThe [CHANGE DISK] button is disabled during recording or timer recording stanby.

English 11