Sanyo DSR - 300 manual Recording Conditions SET, Setting series recording, ‹Off

4RECORDING CONDITIONS SET

<MAIN MENU 1> [MENU] button [ ] button [ ] button

Setting series recording

This section describes how to perform series recording when a number of units have been connected together. When series recording is being carried out, the overwrite setting for the normal recording area and alarm recording area must be set to “OFF” as described on P. 57.

zWhen series recording is set, recording continues on a second digital video recorder when the remaining space in the first recorder’s normal or alarm recording area runs out. Recording in areas with remaining space also stops. If the second digital video recorder is set to perform timer recording, recording continues according to that setting.

1 Connect the digital video recorders using the correct cables. (JP. 17)

zCables of no longer than 3 m in length should be used.

2 Press the [MENU] button.

The <MAIN MENU 1> screen appears.

3 Select “4. RECORDING CONDITIONS SET” and press the [] button.

The <RECORDING CONDITIONS SET> screen appears. The cursor moves to “SERIES RECORDING”.

[	] button [EXIT/OSD]	button
[Settings] (‹ indicates default setting.)
Setting	Description
‹OFF	No series recording.
	When multiple digital video recorders are
ON	connected, sets recording to continue automatically
	on the second and subsequent hard disks when the
	first hard disk becomes full.

4 Press the [ ] button to select “OFF”, then press the [ ] or [ ] button to select “ON”, and press the [] button.

The cursor moves to “OVERWRITE” for the normal recording area.

zThe second DVR can perform recording even when TIMER STANDBY mode has been activated.

SETTINGS <MAIN MENU 1>

56 English