Sanyo DSR - 300 manual Before USE

1BEFORE USE

Hard disk protection

The hard disk is checked automatically at power ON. If a hard disk problem is found, the CHANGE DISK indicator flashes. To initialize the disk or save images stored on the disk, contact a Sanyo service centre.

Care

zTo clean the digital video recorder, unplug the power plug from the wall outlet and wipe the unit lightly with a soft cloth.

zTo remove heavy grime, wipe the digital video recorder with a well-wrung cloth soaked in a solution of water and neutral detergent, and then wipe it with a dry cloth.

zDo not clean the unit with benzene or paint thinner. Doing so may break down the finish or strip the paint.

zWhen using a chemical cloth, be sure to follow the precautions provided with it.

zDo not spray insecticide or other volatile chemicals on the cabinet. Do not allow rubber or vinyl products to come into contact with the digital video recorder for extended periods.

Doing so may break down the finish or strip the paint.

During extended disuse

Extended disuse may cause problems in functions, so turn the power on and operate the unit occasionally during such periods.

Backup battery

The digital video recorder comes with a built-in lithium battery. When the digital video recorder has been connected to a wall outlet for at least 48 hours and the date and time have been set, the clock function will continue to operate for up to 30 days after the power plug is disconnected.

When disposing of the digital video recorder, contact a Sanyo service centre for information on how to dispose of the lithium battery.

MENU button

The [MENU] button is disabled when the unit is connected to a PC. When the [MENU] button is operative, operations from the PC are disabled.

AC adapter

Do not use the AC adapter with other equipment.

English 9