Sanyo DSR - 300 manual Alarm REC Mode SET, Setting alarm recording, Change the setting

8ALARM REC MODE SET

\

<MAIN MENU 1> [MENU] button [ ] button [ ] button

[ ] button [EXIT/OSD] button

Setting alarm recording

Follow the procedures below to select the recording picture quality, recording method (i.e., frame or field), audio recording, and recording rate for the alarm recording area.

1 Press the [MENU] button.

The <MAIN MENU 1> screen appears.

2 Select “8. ALARM REC MODE SET” and press the [] button.

The <ALARM REC MODE SET> screen appears.

3 Press the [] button.

“ENHANCED” flashes.

4 Press the [ ] or [ ] button to select the picture quality.

[Settings] (‹ indicates default setting.)

Setting	Description
SUPER FINE	Super Fine: 50 kB
FINE	Fine: 42 kB
‹ENHANCED	Enhanced: 30 kB
NORMAL	Normal: 22 kB
BASIC	Basic: 15 kB

5 Move the cursor to “FRAME/FIELD

RECORDING” and press the [ ] button,
then press the [ ] or [ ] button to
		SETTINGS<MAINMENU1>
change the setting.
[Settings] (‹ indicates default setting.)
Setting	Description
‹FIELD	Sets the recording method to field.
FRAME	Sets the recording method to frame.

6 Move the cursor to “AUDIO RECORDING” and press the [ ] button, then press the [ ] or [ ] button to change the setting.

When this is set to “ON”, the letter “A (indicating that audio will be recorded)” is displayed in front of “REC RATE”, and the maximum number of images that can be recorded is displayed at the bottom of the screen.

64 English