Sanyo DSR - 300 manual Preparing for USE, Changing the position of the operation display area

1PREPARING FOR USE

Changing the position of the operation display area

[EXIT/OSD] button

1 Press the [EXIT/OSD] button repeatedly.

Pressing the [EXIT/OSD] button repeatedly lets you move or erase the operation display area.

Example: Normal screen

Operation	01- 01 - 04	10FPS
display area	00: 00 : 00EN

Built-in hard disk

Hard disk recording area

z When an unused hard disk is installed, the initial recording area settings (normal recording area 80%, alarm recording area 19%, archive area 1%) are automatically set at recorder power ON.

z When a hard disk with set recording areas is installed, the set recording areas are used for recording.

You can check the recording areas of a set hard disk by selecting “3. RECORDING AREA SET” from the menu.

z When installing a hard disk that was used by another DVR, check the recording area settings.

[B] Alarm recording area

[C] Archive area 1%

19%

80%

[A] Normal recording area

Hard disk’s recording area

[A]

[B]

[C]

[A] Normal recording area

Recording		Recording method
mode
Normal		During monitoring, recording is
	Manual	performed when the [REC/STOP]
recording
		button is pressed.
Timer	Automatic	Recording is carried out in
recording		accordance with timer settings.

[B] Alarm recording area

Recording		Recording method
mode
		Recording is carried out in
		accordance with alarm recording
		settings. Specifically, alarm images
Alarm		are recorded in the alarm recording
	Automatic	area in response to operation of the
recording
		switch that has been installed for the
		alarm input terminal or to detection of
		an intruder or the like using motion
		sensors.
		Recording is carried out in
		accordance with pre-alarm settings.
		Specifically, the same images as
		recorded normally over a preset time
Pre-alarm	Automatic	interval are repeatedly overwritten in
recording		the alarm recording area until an
		alarm occurs. Pre-alarm recording
		can be setup to have the digital video
		recorder record alarm images before
		an alarm input is detected.

[C] Archive area

Recording		Recording method
mode
		This area is used to copy important
		images from the normal recording
		area and alarm recording area. By
Copy	Manual	making changes to the normal
		recording area and the alarm record-
		ing area, this area can be extended to
		up to 10 GB automatically.

Selecting the recording method

z If you want to record images while monitoring;...... P. 23

zIf you want to record with an end time specified

using timer settings; P. 23

zIf you only want to record when an intruder is

present; P. 24, 67

zIf you also want to record images from before the

intruder appears; P. 25

OPERATION

20 English