Alarm and PRE-ALARM Recording | Sanyo DSR - 300 instruction

4ALARM AND PRE-ALARM RECORDING

Pre-alarm recording

Follow the procedures below to have the digital video recorder record an image from before detection of an alarm and the start of alarm recording.

1 Set pre-alarm recording.

Follow the procedures on P. 64 to set “8. ALARM REC MODE SET” on the <MAIN MENU 1> screen to “PRE-

ALARM RECORDING”.

2 Following this, press the [EXIT/OSD] button.

The display returns to the normal screen.

“PRE” is displayed in the operation display area and the ALARM indicator lights. Pre-alarm recording starts (without displaying a symbol).


	05- 10- 04									PRE				0001
	05- 10- 04									PRE				0001
	20: 10: 00									EN						10FPS

Until an alarm signal is received, video will be recorded in a repetitive fashion in a section of the alarm recording area as set for pre-alarm recording by "DURATION".

If an alarm is detected

Pre-alarm recording is automatically ended and alarm recording starts.

z“PRE” from the operation display area is replaced by “ALARM” and the ALARM indicator flashes.


	05- 10- 04									ALARM						0001
	05- 10- 04									ALARM						0001
	20: 10: 00									EN						10FPS

zWhen you record for the first time, the default settings are used. For details regarding changing of the image quality or recording rate, see P. 64.

zWhen the space remaining in the alarm recording area drops below the setting value, the ALARM FULL indicator lights and recording stops. You can start recording from the beginning again by changing the recording setting. (JP. 57)

ALARM FULL indicator

English

25

Image 26

Sanyo DSR - 300 manual Alarm and PRE-ALARM Recording, Pre-alarm recording, Set pre-alarm recording, If an alarm is detected

Contents

Page Precaution Service Introduction Main featuresAccessories Introduction Symbols used in this manualCopyright Contents Contents Settings Network Control Contents Interface SpecificationsNetwork Settings Contents Network Operation Specifications Conditions to avoid Installation conditionsBefore USE Hard disk and cooling fan are expendable items Before USE Assemble and tighten the 4 screws ReplacementReplacing a Removable HDD Replace the cover Replacing a Removable HDD Removal Pull the HDD tray out using the handle Names and Functions of Parts Front panel Names and Functions of Parts ALL Reset switch Rear panel Connecting cables to the control and alarm terminals Installation and ConnectionsConnecting a remote control circuit Basic connections Making analog series connections Installation and ConnectionsConnecting a multiplexer Connecting the power cord If you disconnect the power cable Preparing for USE Operation display area Built-in hard disk Preparing for USEChanging the position of the operation display area Selecting the recording method To change the language Setting the LANGUAGE/CLOCKWhen you have made a selection, press the button Press the Menu button Press the button Setting the LANGUAGE/CLOCKSetting the time Press the or button to select Press the button Normal recording Normal RECORDING/TIMER RecordingTimer recording Set alarm recording Alarm and PRE-ALARM RecordingAlarm recording When alarm input is detected Set pre-alarm recording Alarm and PRE-ALARM RecordingPre-alarm recording If an alarm is detected Press the PLAY/STOP button PlaybackFast-forward playback/fast-rewind playback Frame advance forward/reverse Normal RECORDING/TIMER Recording PlaybackViewing still images During playback, press the Still Button Press the Channel button while a still image is displayed Switching between frame and field playbackPlayback with a channel specified for the camera image Press the or button to specify a channel TIME/DATE Search JP Alarm Search JPSearching for Recorded Images Archive Area Search JP During playback, press the Alarm button Searching for Recorded Images Alarm SearchCheck that Alarm Search is selected, and press the button Press the or button to select the image to play back Press the or button to select Searching for Recorded Images Alarm Thumbnail SearchTIME/DATE Search Press the or button to select TIME/DATE Search Press the button to select VIEW, then press the button Searching for Recorded ImagesPress the button and set the date/ time to search Motion Detection Search ‹ALARMSearching for Recorded Images Archive Area Search Press the or button to select the image for playback Set the motion sensor Motion Sensor Press the or button to select View Press the button Move the cursor to Exit and press the or buttonPress the or button to select Preview Press the button „ If not FOUND! is displayed Copying an image to the hard disk’s archive area JP Saving & Copying Recorded ImagesCopying an image to the hard disk’s archive area Copying an image to a CompactFlash card or Microdrive JP Press Button Saving & Copying Recorded ImagesPress the Copy button Press the button, then the or button to select Minutes Insertion method Insert the CompactFlash cardPress the button Press the or button to select Pictures Removal method Jpeg images Recording area in CompactFlash cardsMove the cursor to Start and press the button Copying frame-recorded images to a CompactFlash card To leave the Copy Menu Settings screen, press the button Saving Menu SettingsLoading settings from a CompactFlash card Saving on a CompactFlash card Saving Menu Settings When copying recording area settings Press the or button to select a menu Menu Configuration and OperationsDisplaying menu screens and setting screens Moving to a sub-menu from Main Menu 1 or Default values Menu Configuration and OperationsTo restore menu setting items to their Overview of Main Menu 1 sub Normal REC Mode SET JP Overview of Main Menu 2 sub- menus Security Lock SET JP Lets you set passwords Network SET JP Field recording „ When recording with an 80-GB hard disk at 100% capacityTable of recording rate and times Frame recording „ When recording with a 160-GB hard disk at 100% capacity Recording time LANGUAGE/CLOCK SET Daylight Saving settingsPress the or button to change the setting When USE is selected for Daylight Saving EXT. Clock SET settingsPress the or button to move the cursor to ADJUST. Time LANGUAGE/CLOCK SET Flashes Select 2. Video Input SET, and press the button Settings for multiplexer connectionVideo Input SET Press the or button to select the multiplexer to be used Displaying the recording area „ Default hard disk settingsRecording Area SET Select 3. Recording Area SET and press the button With Normal Recording Area selected, press the button Recording Area SETChanging recording areas „ Recording area allocations Setting overwriting for the alarm recording area Setting overwrite permissionSetting overwriting for the normal recording area To finish this process Select 4. Recording Conditions SET and press the button Setting series recordingRecording Conditions SET ‹OFF Example 5% Recording Conditions SETPress the button, then press the or button to select OFF OFF Setting Auto Delete Example on Normal REC Mode SETSelect 5. Normal REC Mode SET and press the button Example Select 6. Timer SET and press the button Timer SETTimer setting items Start Select 6.TIMER SET and press the button Timer SETTo cancel all set timer reservations Press the or button to change SUN to DLY Set the items in the Week and Start columns Timer reservations spanning more than 24 hoursSet the end Week and Stop time. Switch SET to on Set the month and day in item No After entering the setting, press the buttonHoliday SET Example To set November 17 as a holiday Select 8. Alarm REC Mode SET and press the button Alarm REC Mode SETSetting alarm recording Change the setting Alarm REC Mode SET When alarm recording settings have been completed When settings have been completed Setting pre-alarm recordingSetting the alarm trigger Alarm or Setting the motion sensor Move the cursor to Motion Sensor and press the button DISPLAY/VIDEO Loss SET Display SET and Video Loss SET setting itemsSettings Press the Menu button twice Select RS-232C and press the button Settings for RS-232C and RS-485When RS-232C is selected Select RS-485 and press the button When RS-485 is selectedRS-232C/RS-485 SET Press Button, then the or Button to set the data speed, Buzzer SET screen setting items Buzzer SET Security Lock SET Password setting exampleSecurity Lock SET screen setting items Security Lock SET Setting passwordsWhen you have finished making the setting, press the button Press the and buttons to select the character to enter Press the and buttons to select ON, then press the button Setting the user passwordExample Setting AB123456 Example a Setting the security lock To check the security lock, press any button Network SET Making network connections Display Making network settingsNetwork SET Example Setting AB123456 to ID1 Password settingPress the , , , and buttons to input the password Press the or button to select ID1 HDD SET Initializing the hard disk Failure Power FAILURE/USED TimeRecover Firmware RS-485 Interface SpecificationsRS-232C Connection Setting the RS-485 termination switchTermination settings Cable types Commands Commands for acquiring information Commands for setting the recorderOn-screen commands „ Menu 74H „ /CLEAR 53H Bit assignments in Status Sense D7H data bytes Byte Timer ST-BY Normal REC FullAlarm REC Full Normal REC „ RS-485 RCV CMF FEH Commands RS-485 onlyExample Setting group number Example Group number Return codes Command table Page Manual for Remote Operation By Network Connection Operations possible with PC control Network settingsNetwork Control Function Saving and playing back sound Click Properties Network Control FunctionClick Network Connections Click OK Controlling from a PC Enter a password for verification purposesPreparing for Network Control Launch the PC’s web browser Preparing for Network Control Entering the operation screen When control rights are switched to the unit Messages displayed when connectedWhen control rights are switched to Controlling from the unit Playback buttons Setting buttonsChannel and screen selection buttons Recording buttons Click the button on the operation panel SettingsMaking menu selection Menu structure Daylight SAVING/EXT. Clock SET MENU-SPECIFIC SettingsClock SET Video Input SET MENU-SPECIFIC Settings100 Multiplexer Total capacity display Recording area reset101 Area-specific capacity display 102 Select Overwrite for alarm recording areaSetting the remaining-space warning level Select Overwrite for normal recording area Normal REC Mode SET 103 „ Setting a timer for over 24-hours continuous recording „ Performing timer recording„ Overlapping of timer reservation times 104 Specify the day to be treated as a holiday 105Holiday SET Set the duration for alarm recording Select a mode using Alarm RecordingUsing Duration 106 107 Select on or OFF using PRESet the duration for pre-alarm recording using Duration Make a selection for REC Rate Display SET Click the location where the motion sensor is to be setup108 Set the motion sensor level Buzzer SET Select on or OFF for the alarm buzzer109 To sound a buzzer on the PC Password Setting Change the settings as requiredChanging network-related settings 110 HDD SET Power FAILURE/USED Time111 Hard disk capacity 112 Canceling timer recordingRecording Images Stopping normal recording Watching live images during playback Watching Images113 Playing back recorded images Watching Images Performing operations in play mode114 Specifying the channel camera number Screen display items Adjusting the image and audio115 116 Settings for downloading live images to a PCSet the download time using Duration Set Save to PC to on and then click SET Click Browse „ To cancel a save operation117 Click Start 118 Search ModeSearch for images using the search mode screen Basic operation Operations in Search Modes 119 Select 3. TIME/DATE Search from the Search menu 120Operations in Search Modes Click Preview Select 5. Motion Detection Search from the Search menu Setting motion sensor detection conditions121 Click Button on the operation Panel 122Copying to the archive area Copying to Archive Area Downloading to a PC 123Saving Recorded Images 124 Image viewer screen 125 Installing the DVR ViewerDVR Viewer Operating environment Opening and closing DVR Viewer 126DVR Viewer Click Open O in the File F menu 127Opening files Toolbar Main window 128Viewing images Thumbnail window Prev 129TOP 11IMAGE Number 130 Printing images Specify the start image and end image to be saved 131Saving images Click Start Copy 132 SpecificationsSpecifications Jpeg Dimensions 133 Labor Parts Year ExclusionsWeekdays 830 AM 500 PM Pacific Time